- Network Installment
Below is the common installment scheme for GROOVIA. This setup can be different for each installation location
- Audio/Video Cable Connection
The STB which is provided can be connected to two video output interface device (example: TV, other Video/Audio Stereo), see at the picture below.
- Connect to Home Gateway
Connect STB ethernet port to GROOVIA port (port 4) on Home Gateway device using a network cable.
- Power On
When all the devices are attached, the next step is to turn on the GROOVIA power, here are the manual:
- Make sure all the wire has been attached.
- Make sure all the device have an electrical supply.
- Turn on the television.
- Turn on the STB Modem
- Press the TV/AV button, wait until the GROOVIA EPG Menu (Electronic Program Guide) appears on television screen.